Audry Simms asked 1 ปี ago
How to Change a Subaru Spare Key
Call a locksmith if you have lost your Subaru key. Locksmiths can usually cut you a key cheaper than the dealer.
Subaru car keys are generally either intelligent “push-to-start” fob remote keys, or simply metal keys. The Fob key comes with an embedded chip and will need to be reprogrammed.
Keyless Entry System
A key fob lets you to lock or unlock your subaru impreza key [similar webpage] from a distance. It can also unlock the trunk or lift gate of your vehicle. These remotes are connected to an inside keypad to communicate with the computer system inside the vehicle.
Certain models of Subaru have a feature that is not widely known called PIN Code Access. You can make a custom number sequence to open and start your car. Read the owner’s manual to learn how to use this feature if you have a Subaru Forester, Outback Crosstrek, WRX STI or Impreza.
It’s possible that the battery inside the key fob has failed. You can test the battery life of your key fob with a portable tester or a multimeter you can find in your garage.
The next step is to remove the key fob from its case and inspect its transmitter circuit board. It will have one or two sets of 8-digit numbers, so make a note of the first set so you can recall it later. After you’ve completed this, you can start programming the key fob at home. The process for doing this varies depending on the model and year of your vehicle, but it’s usually simple enough to complete by yourself.
Key Fobs
Subaru’s latest models come with key fobs that not only open the doors but also activate your lights, lock your gas cap, and start your vehicle. This last trick is particularly helpful if you’ve ever arrived at the pump only to discover that your car won’t start because the battery in the key fob has died.
No matter if your Subaru is new or old it’s likely that your key fob can be replaced without difficulty. Be aware that some of the most modern models, with their high level technology, may require a visit to the dealer. However, with a little time and effort, you’ll have your replacement key fob waiting to be used at home.
Start by opening the case and inspecting the circuit board of the transmitter. (Instructions on how to open the case are usually provided in the owner’s guide). It should contain two or three sets of serial numbers, each one of which is 8 digits long. Keep the first set of numbers in your wallet for later reference.
Then, sit in your driver’s seat and close all the doors. Turn the key 10 times to start your car, and then turn off the engine. Press the lock button on your key fob and open the door to ensure whether your doors are functioning properly. After that shut the door and take the key out of the ignition. You should hear the chime from your vehicle, signalling that the key fob is programmed.
Ignition System
If your Subaru keys aren’t functioning as they ought to, it could be due to the fact that the battery is dead. If you are aware of the issue, you can replace the battery in your key fob yourself. A replacement battery is inexpensive and relatively easy to locate. If the key fob isn’t responding to your commands It could be a different issue. It is recommended to visit a dealer for a spare key. They will make sure that the key is an original Subaru key that is under warranty, and that it will be programmed for your vehicle. This is much safer and more convenient than purchasing an aftermarket key from a business online.
You can also have the dealer cut a new key if they are provided with your VIN number as well as proof of ownership. This information is used to identify the key replacement to ensure that it can be recognized by your immobilizer. This procedure is more complicated than simply cutting a new key, and the dealership will usually charge more for this service.
Once the new key is programmed it will be able to swap it with your current key. It takes only five seconds to insert the new key, Subaru Impreza key so be sure to keep your working key at the ready. You can take the key off after the security light has stopped flashing and you can test it.
Battery Replacement
One of the key features that makes Subaru fobs useful is their ability to switch on your car’s power windows as well as sunroof at the touch of a button. However, the battery in your Subaru key fob is not meant to last forever. It will eventually require replaced. This short guide from Capitol Subaru will help you to replace the battery yourself.
To start you’ll need to locate the tiny crevice inside the seam that separates the front and back of your key fob. You can open this seam with the flat-head screwdriver, which will reveal the small compartment that houses the battery. Take out the old battery and then insert a new one, making sure that it is facing the correct side up. Once you have assembled everything, Subaru Impreza Key you can use the new key fob for locking or unlocking your vehicle.
It’s always best to have an extra set of keys available particularly if you’ve lost yours or it’s not functioning properly. A new key can be bought at your local auto dealership, or you can have one cut from locksmiths. It is important to ensure to ensure that your key works correctly as soon as you can so that you can safely drive.